Yamaha FX-HO-Cruiser-SHO-SVHO Most 2013-21 Custom PWC Storage Cover WCSS

Product Description

AFTER BUYING THE COVER, PLEASE SEND US A MESSAGE WITH THE COLORS YOU WANT FOR EACH OF THE 11 PANELS.

AVAILABLE COLORS:
- Black
- Red
- Caribbean Blue
- Sand
- Dark Green
- Burgundy
- Sea Gull Gray
- Navy Blue
- Tan
- Teal

APPLICATION:
2012 FX HO
2012 FX SHO
2012 FX CRUISER HO
2012 FX CRUISER SHO
2013 FX HO
2013 FX SHO
2013 FX CRUISER HO
2013 FX CRUISER SHO
2014 FX HO
2014 FX SHO
2014 FX SVHO
2014 FX Cruiser HO
2014 FX Cruiser SHO
2014 FX Cruiser SVHO
2015 FX Cruiser SVHO
2015 FX SVHO
2015 FX Cruiser SHO
2015 FX SHO
2015 FX Cruiser HO
2015 FX HO
2016 FX SVHO
2016 FX Crusier SVHO
2016 FX Cruiser SHO
2016 FX Cruiser HO
2016 FX HO
2017 FX HO
2017 FX Cruiser HO
2017 FX SVHO
2017 FX Cruiser SVHO
2017 FX Limited SVHO

2018 Yamaha FX Cruiser HO
2018 Yamaha FX HO
2018 Yamaha FX SVHO
2018 Yamaha FX Cruiser SVHO
2018 Yamaha FX Limited SVHO

2019 Yamaha FX Cruiser HO
2019 Yamaha FX HO
2019 Yamaha FX SVHO
2019 Yamaha FX Cruiser SVHO
2019 Yamaha FX Limited SVHO
2020 Yamaha FX Cruiser HO
2020 Yamaha FX HO
2020 Yamaha FX SVHO
2020 Yamaha FX Cruiser SVHO
2020 Yamaha FX Limited SVHO
2021 Yamaha FX Cruiser HO
2021 Yamaha FX HO
2021 Yamaha FX SVHO
2021 Yamaha FX Cruiser SVHO
2021 Yamaha FX Limited SVHO

Brand: WCSS
Internal Code: 111WS422-VC

Each of our custom storage covers are made from a very high end 600 Denier solution dyed polyester to resist fading and dry rot. We use only the highest quality thread that is designed to withstand the harsh UV rays from the sun without it deteriorating. Each cover is custom fitted to your specific year, make and model watercraft so you know it will have a great look whether sitting on your dock or traveling down the road on your trailer. All covers have a shock cord sewn into the hem and include adjustable tie down straps for added security while trailering locally.

Being a custom product there are NO RETURNS ACCEPTED.
Covers have a 1 year warranty against any defects in material or workmanship.

INSTALLATION:
Your new Watercraft Superstore cover is designed to give years of protection to your PWC. To install the cover, it is best to start at the handle bars and mirrors (if equipped) then pull the cover forward over the bow and rearward over the stern of the craft.

The shock cord installed at the hem of the cover should be pulled down under the rub rail of the PWC. Most covers will hold in place with just the use of the shock cord for stationary storage.

If the craft is going to be towed or is stored in an area that gets high winds, we suggest using the provided tie down straps to wrap under the PWC to secure the cover. The watercraft should always be clean before installing any cover to prevent damage to the finish.

Need more info?
Ask a question.
We will answer questions in a matter of minutes...