Loading... Please wait...
- Home
- Boat Steering & Control
- Control Box & Cables & Parts
- Mercury/Quicksilver Remote Control Panel Mount Power Trim 883710A02
Categories
- HOME
- ATV - UTV Parts (4 Wheeler)
- BBQ-Cooler-Kitchen-Appliances
- Boat Accessories: Deck-Cabin
- Boat Inboard I/O Engine Parts
- Boat Outboard Engine Parts
- Boat Steering & Control
- Motorcycles Dirt/Super Bikes
- Electrical
- Engine Maintenance Parts
- Fishing
- Fuel: Tank-Filter-Sender-Parts
- General Boating
- GPS Fishfinder Navigation
- Hardware
- Jetboat & PWC Watercraft Parts
- Maintenance & Care
- Paint & Accessories & Tools
- Plumbing: Pumps-Parts-Fittings
- RV Camper Outdoor Hitch Tow
- Propellers-Skeg Guard-Anodes
- Sailing-Sailboat
- Snowmobile Parts
- Sports & Recreation & Clothing
- Stereo Receiver Speaker Amps
- Trailer Parts Trailering
- Trolling Motors & Accessories
- Used Parts
- Used & Remanufactured Engines
- Ventilation: Blower-Hatch-AC
- Others
)
Product Description
BRAND: Quicksilver, Mercury
DESCRIPTION:
- Panel Mount Control w/Power Trim
- Requires: Gen II Control Cables.
FEATURES:
- Panel mount control features a chrome handle and comes with a 4' trim harness with a 3 pin molex connector.
- Requires a separate Ignition/Choke assembly and cables.
- Neutral safety switch leads are 6-1/2' with bullet connectors.
- Lanyard switch leads also have bullet connectors.
- For use on select Mercury/Mariner outboards w/integral trim.
- Installations require a separate ignition/choke assembly and throttle/shift cables.
- Power trim adapter harness is included to convert 3 pin Molex connector to a 3 blade Mercury connector.
- Neutral safety switch leads are 6.5 ft.(1.98m) long and have bullet connectors on the ends.
- Lanyard switch leads also have bullet connectors on ends.
- Must use Gen II throttle/shift cables design(883719A or 897978A).
APPLICATION:
- Gen II Lock bar.
- MCM and Mercury/Mariner 3.4L O/B with external trim cylinders
- 8/9.9 4-stroke engines 2005 and newer will use 896145A series and 8/9.9/generation change above S/N OR192772 and 15/20 4-stroke will use Gen II series T/S cable.
- Gen II Lock bar. Fits: Mercury/Mariner OB with integral power trim and 1993 and newer Force OB 40 hp
- Select Mercury/Mariner outboards (w/integral trim)
Internal Code: 710-883710A02
Manufacturer Part Number: 883710A02
DESCRIPTION:
- Panel Mount Control w/Power Trim
- Requires: Gen II Control Cables.
FEATURES:
- Panel mount control features a chrome handle and comes with a 4' trim harness with a 3 pin molex connector.
- Requires a separate Ignition/Choke assembly and cables.
- Neutral safety switch leads are 6-1/2' with bullet connectors.
- Lanyard switch leads also have bullet connectors.
- For use on select Mercury/Mariner outboards w/integral trim.
- Installations require a separate ignition/choke assembly and throttle/shift cables.
- Power trim adapter harness is included to convert 3 pin Molex connector to a 3 blade Mercury connector.
- Neutral safety switch leads are 6.5 ft.(1.98m) long and have bullet connectors on the ends.
- Lanyard switch leads also have bullet connectors on ends.
- Must use Gen II throttle/shift cables design(883719A or 897978A).
APPLICATION:
- Gen II Lock bar
- MCM and Mercury/Mariner 3.4L O/B with external trim cylinders
- 8/9.9 4-stroke engines 2005 and newer will use 896145A series and 8/9.9/generation change above S/N OR192772 and 15/20 4-stroke will use Gen II series T/S cable.
- Gen II Lock bar
- Select Mercury/Mariner outboards (w/integral trim)
Internal Code: 710-883710A02
Manufacturer Part Number: 883710A02
