Loading... Please wait...
- Home
- GPS Fishfinder Navigation
- GPS, Fishfinder & Autopilot
- Other Brands
- Maretron Pressure Transducer 0 to 5000 PSI PT-0-5000PSI-01 Boat Marine
Categories
- HOME
- ATV - UTV Parts (4 Wheeler)
- BBQ-Cooler-Kitchen-Appliances
- Boat Accessories: Deck-Cabin
- Boat Inboard I/O Engine Parts
- Boat Outboard Engine Parts
- Boat Steering & Control
- Motorcycles Dirt/Super Bikes
- Electrical
- Engine Maintenance Parts
- Fishing
- Fuel: Tank-Filter-Sender-Parts
- General Boating
- GPS Fishfinder Navigation
- Hardware
- Jetboat & PWC Watercraft Parts
- Maintenance & Care
- Paint & Accessories & Tools
- Plumbing: Pumps-Parts-Fittings
- RV Camper Outdoor Hitch Tow
- Propellers-Skeg Guard-Anodes
- Sailing-Sailboat
- Snowmobile Parts
- Sports & Recreation & Clothing
- Stereo Receiver Speaker Amps
- Trailer Parts Trailering
- Trolling Motors & Accessories
- Used Parts
- Used & Remanufactured Engines
- Ventilation: Blower-Hatch-AC
- Others
)
Product Description
BRAND: Maretron
DESCRIPTION:
Pressure Transducer 0 to 5000 PSIThis pressure transducer is designed to connect to the NMEA 2000; network via a Maretron FPM100 Fluid Pressure Module.Specifications:Range: 0 to 5000 PSI (344.74 bar)Accuracy: +/- 0.5% Full ScaleType: Absolute (no vent tube)Installation:All Maretron pressure transducer assemblies are equipped with a 1/4 in. NPT male threaded fitting. Install the pressure transducer to a 1/4 in. NPT female fitting on the system or tank is to be monitored with a maximum torque of 150 in-lbs (16.95 Nm).If you are monitoring a system where pressure spikes or transients will occur or where the pressure will exceed the maximum pressure rating of the pressure transducer install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first then install the pressure transducer to the female port on the pressure snubber.
Manufacturer Part Number: PT-0-5000PSI-01
Internal Code: 99018
Brochure:
Instalation Guide: https://productimageserver.com/literature/installations/99018IN.pdf
Video:
Need more info?
Ask a question.
We answer questions quickly....
DESCRIPTION:
Pressure Transducer 0 to 5000 PSIThis pressure transducer is designed to connect to the NMEA 2000; network via a Maretron FPM100 Fluid Pressure Module.Specifications:Range: 0 to 5000 PSI (344.74 bar)Accuracy: +/- 0.5% Full ScaleType: Absolute (no vent tube)Installation:All Maretron pressure transducer assemblies are equipped with a 1/4 in. NPT male threaded fitting. Install the pressure transducer to a 1/4 in. NPT female fitting on the system or tank is to be monitored with a maximum torque of 150 in-lbs (16.95 Nm).If you are monitoring a system where pressure spikes or transients will occur or where the pressure will exceed the maximum pressure rating of the pressure transducer install a Pressure Snubber (PT-SNUB-01) onto the system being monitored first then install the pressure transducer to the female port on the pressure snubber.
Manufacturer Part Number: PT-0-5000PSI-01
Internal Code: 99018
Brochure:
Instalation Guide: https://productimageserver.com/literature/installations/99018IN.pdf
Video:
Need more info?
Ask a question.
We answer questions quickly....
