Loading... Please wait...
- Home
- Paint & Accessories & Tools
- Paint & Solvents
- Awlgrip T0031 Slow Drying Brushing Reducer QUART f 545 Epoxy-Awlquik Primer Paint
Categories
- HOME
- ATV - UTV Parts (4 Wheeler)
- BBQ-Cooler-Kitchen-Appliances
- Boat Accessories: Deck-Cabin
- Boat Inboard I/O Engine Parts
- Boat Outboard Engine Parts
- Boat Steering & Control
- Motorcycles Dirt/Super Bikes
- Electrical
- Engine Maintenance Parts
- Fishing
- Fuel: Tank-Filter-Sender-Parts
- General Boating
- GPS Fishfinder Navigation
- Hardware
- Jetboat & PWC Watercraft Parts
- Maintenance & Care
- Paint & Accessories & Tools
- Plumbing: Pumps-Parts-Fittings
- RV Camper Outdoor Hitch Tow
- Propellers-Skeg Guard-Anodes
- Sailing-Sailboat
- Snowmobile Parts
- Sports & Recreation & Clothing
- Stereo Receiver Speaker Amps
- Trailer Parts Trailering
- Trolling Motors & Accessories
- Used Parts
- Used & Remanufactured Engines
- Ventilation: Blower-Hatch-AC
- Others
)
Product Description
BRAND: Awlgrip
DESCRIPTION: Epoxy reducer for use when brushing or rolling 545 Epoxy Primer or Awlquik Primer.
FEATURES & ATRIBUTES:
- For Epoxy Primers and Urethane Topcoats
- Use T0031 to reduce the viscosity of Awlgrip Topcoats, Awlgrip 545 Primer, and Awl-Quik Sanding Surfacer in brush/roller applications.
Manufacturer PN: 5608008 or T0031/1QTUS
Internal Code: 510998
DESCRIPTION: Epoxy reducer for use when brushing or rolling 545 Epoxy Primer or Awlquik Primer.
FEATURES & ATRIBUTES:
- For Epoxy Primers and Urethane Topcoats
- Use T0031 to reduce the viscosity of Awlgrip Topcoats, Awlgrip 545 Primer, and Awl-Quik Sanding Surfacer in brush/roller applications.
- Evaporates slowly, keeping the film open, and minimizing brush marks
- For Awlgrip Topcoats, add T0031 at 25 to 35% of the mixed color base and converter
- The mix ratio for gloss finishes would be 2:1:3/4 or 2:1:1 by volume
- Temperatures above 85F may require slightly more T0031 to help compensate for increased solvent evaporation rates at higher temperatures
- T0031 can be blended with other Awlgrip reducers. If a "retarder" reducer is needed for a spray application, T0005 should be used
Manufacturer PN: 5608008 or T0031/1QTUS
Internal Code: 510998
Need more info?
Ask a question.
We will answer questions in a matter of minutes.
