Loading... Please wait...
- Home
- Paint & Accessories & Tools
- Paint & Solvents
- Awlgrip D3001/1QTUS Converter Quart f 545 Anticorrosive Epoxy Primer Boat Paint
Categories
- HOME
- ATV - UTV Parts (4 Wheeler)
- BBQ-Cooler-Kitchen-Appliances
- Boat Accessories: Deck-Cabin
- Boat Inboard I/O Engine Parts
- Boat Outboard Engine Parts
- Boat Steering & Control
- Motorcycles Dirt/Super Bikes
- Electrical
- Engine Maintenance Parts
- Fishing
- Fuel: Tank-Filter-Sender-Parts
- General Boating
- GPS Fishfinder Navigation
- Hardware
- Jetboat & PWC Watercraft Parts
- Maintenance & Care
- Paint & Accessories & Tools
- Plumbing: Pumps-Parts-Fittings
- RV Camper Outdoor Hitch Tow
- Propellers-Skeg Guard-Anodes
- Sailing-Sailboat
- Snowmobile Parts
- Sports & Recreation & Clothing
- Stereo Receiver Speaker Amps
- Trailer Parts Trailering
- Trolling Motors & Accessories
- Used Parts
- Used & Remanufactured Engines
- Ventilation: Blower-Hatch-AC
- Others
)
Product Description
BRAND: Awlgrip
DESCRIPTION: CONVERTER ONLY FOR 545 EPOXY PRIMER
PRIMER DESCRIPTION:
- 545 Epoxy Primer is a multi-use, corrosion-resistant epoxy primer used to seal undercoats and surfacing primers before applying finishes.
- Can be applied both above and below the waterline on a wide range of substrates, via spray or brush and roller
FEATURES & ATRIBUTES:
- A two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood and fiberglass substrates.
- Used to seal surfacing primers before applying topcoats. It may be applied by spray, brush, or roller and may be used above or below the waterline.
- 545 has a relatively low build, 2 to 3 mils DFT and is slow drying - requires overnight cure to recoat.
- Reduce with T0006 to spray. Reduce with T0031 for brush/roller application. 545 can be accelerated with Cold Cure (M3066).
- Mix ration 1:1.
Manufacturer PN: D3001/1QTUS
Internal Code:508335
WHL:23R-3 BACK (right side)
DESCRIPTION: CONVERTER ONLY FOR 545 EPOXY PRIMER
PRIMER DESCRIPTION:
- 545 Epoxy Primer is a multi-use, corrosion-resistant epoxy primer used to seal undercoats and surfacing primers before applying finishes.
- Can be applied both above and below the waterline on a wide range of substrates, via spray or brush and roller
FEATURES & ATRIBUTES:
- A two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood and fiberglass substrates.
- Used to seal surfacing primers before applying topcoats. It may be applied by spray, brush, or roller and may be used above or below the waterline.
- 545 has a relatively low build, 2 to 3 mils DFT and is slow drying - requires overnight cure to recoat.
- Reduce with T0006 to spray. Reduce with T0031 for brush/roller application. 545 can be accelerated with Cold Cure (M3066).
- Mix ration 1:1.
Manufacturer PN: D3001/1QTUS
Internal Code:508335
Need more info?
Ask a question.
We will answer questions in a matter of minutes.
WHL:23R-3 BACK (right side)
