Loading... Please wait...
- Home
- Paint & Accessories & Tools
- Paint & Solvents
- Awlgrip 545 Anti-Corrosive Epoxy Primer White Base GALLON D8001/1GLUS BoatMarine
Categories
- HOME
- ATV - UTV Parts (4 Wheeler)
- BBQ-Cooler-Kitchen-Appliances
- Boat Accessories: Deck-Cabin
- Boat Inboard I/O Engine Parts
- Boat Outboard Engine Parts
- Boat Steering & Control
- Motorcycles Dirt/Super Bikes
- Electrical
- Engine Maintenance Parts
- Fishing
- Fuel: Tank-Filter-Sender-Parts
- General Boating
- GPS Fishfinder Navigation
- Hardware
- Jetboat & PWC Watercraft Parts
- Maintenance & Care
- Paint & Accessories & Tools
- Plumbing: Pumps-Parts-Fittings
- RV Camper Outdoor Hitch Tow
- Propellers-Skeg Guard-Anodes
- Sailing-Sailboat
- Snowmobile Parts
- Sports & Recreation & Clothing
- Stereo Receiver Speaker Amps
- Trailer Parts Trailering
- Trolling Motors & Accessories
- Used Parts
- Used & Remanufactured Engines
- Ventilation: Blower-Hatch-AC
- Others
)
Product Description
BRAND: Alwgrip
DESCRIPTION:
- 545 EPOXY PRIMER WHT BSE
- 545 Anti-Corrosive Epoxy Primer
FEATURES & ATRIBUTES:
- A two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood and fiberglass substrates.
- Used to seal surfacing primers before applying topcoats.
- It may be applied by spray, brush or roller and may be used above or below the waterline.
- 545 has a relatively low build, 2 to 3 mils DFT and is slow drying - requires overnight cure to recoat.
- Reduce with T0006 to spray.
- Reduce with T0031 for brush/roller application.
- 545 can be accelerated with Cold Cure (M3066).
- Gray (D1001) rolls/brushes better than white.
- Mix ration 1:1.
Manufacturer PN:D8001/1GLUS
Internal Code:508486
DESCRIPTION:
- 545 EPOXY PRIMER WHT BSE
- 545 Anti-Corrosive Epoxy Primer
FEATURES & ATRIBUTES:
- A two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood and fiberglass substrates.
- Used to seal surfacing primers before applying topcoats.
- It may be applied by spray, brush or roller and may be used above or below the waterline.
- 545 has a relatively low build, 2 to 3 mils DFT and is slow drying - requires overnight cure to recoat.
- Reduce with T0006 to spray.
- Reduce with T0031 for brush/roller application.
- 545 can be accelerated with Cold Cure (M3066).
- Gray (D1001) rolls/brushes better than white.
- Mix ration 1:1.
Manufacturer PN:D8001/1GLUS
Internal Code:508486
Returns IN NEW ITEMS accepted in 30 days"""ONLY""" if they have NOT being installed and are in similar condition as when they were shipped. If you missed parts of the item, item CANNOT be returned.
Need more info?
Ask a question.
We will answer questions in a matter of minutes.
