Loading... Please wait...
- Home
- Paint & Accessories & Tools
- Paint & Solvents
- Awlgrip 545 Anti-Corrosive Epoxy Primer GRAY Base Quart D1001/1QTUS Boat Paint
Categories
- HOME
- ATV - UTV Parts (4 Wheeler)
- BBQ-Cooler-Kitchen-Appliances
- Boat Accessories: Deck-Cabin
- Boat Inboard I/O Engine Parts
- Boat Outboard Engine Parts
- Boat Steering & Control
- Motorcycles Dirt/Super Bikes
- Electrical
- Engine Maintenance Parts
- Fishing
- Fuel: Tank-Filter-Sender-Parts
- General Boating
- GPS Fishfinder Navigation
- Hardware
- Jetboat & PWC Watercraft Parts
- Maintenance & Care
- Paint & Accessories & Tools
- Plumbing: Pumps-Parts-Fittings
- RV Camper Outdoor Hitch Tow
- Propellers-Skeg Guard-Anodes
- Sailing-Sailboat
- Snowmobile Parts
- Sports & Recreation & Clothing
- Stereo Receiver Speaker Amps
- Trailer Parts Trailering
- Trolling Motors & Accessories
- Used Parts
- Used & Remanufactured Engines
- Ventilation: Blower-Hatch-AC
- Others
)
Product Description
BRAND: Awlgrip
DESCRIPTION:
- 545 Epoxy Primer is a multi-use, corrosion-resistant epoxy primer used to seal undercoats and surfacing primers before applying finishes.
- Can be applied both above and below the waterline on a wide range of substrates, via spray or brush and roller.
FEATURES & ATRIBUTES:
- A two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood and fiberglass substrates.
- Used to seal surfacing primers before applying topcoats. It may be applied by spray, brush, or roller and may be used above or below the waterline.
- 545 has a relatively low build, 2 to 3 mils DFT and is slow drying - requires overnight cure to recoat.
- Reduce with T0006 to spray. Reduce with T0031 for brush/roller application. 545 can be accelerated with Cold Cure (M3066).
- Mix ration 1:1.
Manufacturer PN: D1001 /1QTUS
Internal Code:508272
DESCRIPTION:
- 545 Epoxy Primer is a multi-use, corrosion-resistant epoxy primer used to seal undercoats and surfacing primers before applying finishes.
- Can be applied both above and below the waterline on a wide range of substrates, via spray or brush and roller.
FEATURES & ATRIBUTES:
- A two component epoxy primer with outstanding corrosion and adhesion properties for steel, aluminum, wood and fiberglass substrates.
- Used to seal surfacing primers before applying topcoats. It may be applied by spray, brush, or roller and may be used above or below the waterline.
- 545 has a relatively low build, 2 to 3 mils DFT and is slow drying - requires overnight cure to recoat.
- Reduce with T0006 to spray. Reduce with T0031 for brush/roller application. 545 can be accelerated with Cold Cure (M3066).
- Mix ration 1:1.
Manufacturer PN: D1001 /1QTUS
Internal Code:508272
Returns IN NEW ITEMS accepted in 30 days"""ONLY""" if they have NOT being installed and are in similar condition as when they were shipped. If you missed parts of the item, item CANNOT be returned.
Need more info?
Ask a question.
We will answer questions in a matter of minutes.
